Bleed Ring Manufacturer in India
Flange Bleed Ring are available in size range of 1 to 24 inch
A bleed ring is part of safety and pressure controlling that are applicable in different types of industrial systems, and especially for high pressure in fluids and gases. A bleed ring is principally used to control the pressure relief or “ bleeding”, thus, protect the system most important parts such as the valves, flanges and pipelines. Prashaant Steel and Alloys is a leading Bleed Ring Manufacturer in India, catering to a wide range of industries including chemical, petrochemical, power generation, and oil & gas.
Drip rings are further fashioned flanged or threaded pieces that can fit conveniently to the current pipelines or valves. Bleed rings are designed using material that can overcome pressure and the chemical makeup of the substance which the equipment is dealing with. Typical types of material that are used for this process are stainless steel, carbon steel, and the alloy steels for chemically aggressive surroundings.
The size of a flange bleed ring is dependent on the diameter of the pipe or the valve assembly that will require its services as well the pressure rated needed for use. Bleed rings normally have a cylindrical structure and are fashioned with one end having a flange to guarantee proper connection to piping or valves. Prashaant Steel produces bleed rings that meet the highest industry standards for durability, performance, and safety. The company is known for their precision engineering and commitment to excellence
Pressure is the resonant parameter in the term of the bleeder rings, and they are characterized by the maximum pressure they can experience. This is a critical factor in the selection of a bleed ring for an application because they must be able to handle the maximum operating system pressures without failure.
Bleed ring flange typically have screwed connection as a means of attachment to the system, although there are flanged or welded types depending on the system design.
As stated above Flange Bleed Rings provide extra safety measures but they have to be checked and even repaired usually from time to time in order to work well. At some point, debris accumulates or the system rusts solid, making it difficult for pressure to vent out properly.
Table of content
Bleed ring flange provide a controlled outlet for excess pressure
| Bleed Rings Flanges Size Range | Flange Bleed Ring Ratings | Drip Ring Sealing Finish |
|---|---|---|
|
|
|
| Bleed Ring Flange Sealing Type | Bleed Rings Ports | Bleed Flange Materials |
|
|
|
| Bleed Rings Flanges Also called | Bleed Ring Types | Packaging |
|
|
|
| Drip Ring Standards | Flange Bleed Ring Advantages | Bleed Ring Origin |
|
|
|
| Flange Bleed Ring Test Certificates | Bleed Rings FlangesCoatings | Bleed Flange Equipment |
|
|
|
Drip ring are available in flat face and raised face types
Bleed Rings For Flanges
Flange Bleed Ring
Drip Ring
Bleed Ring Flange
Bleed Flange| Pipe Size (NPS) | ASME-ANSI Class Dimension A | B (Inside BORE-IN) | |||||
| 1 1/2 | 4 1/2 | 3 1/4 | 3 3/4 | 3 5/8 | 3 3/4 | 3 5/8 | 1 5/8 |
| 1 | 3 1/4 | 2 1/2 | 3 | 2 3/4 | 3 | 2 3/4 | 1 1/8 |
| 2 1/2 | 6 1/2 | 4 3/4 | – | 5 | 6 3/8 | 5 | 2 1/2 |
| 1 1/4 | – | 3 2 7/8 | – | 3 1/8 | 3 3/8 | 3 1/8 | 1 1/2 |
| 2 | 5 5/8 | 4 | 5 1/2 | 4 1/4 | 5 1/2 | 4 1/4 | 2 1/8 |
| 3 1/2 | – | 6 1/4 | – | 6 3/8 | – | 6 1/4 | 3 5/8 |
| 3 | 7 5/8 | 5 1/4 | 6 3/4 | 5 3/4 | 6 1/2 | 5 3/4 | 3 1/8 |
| 5 | 10 7/8 | 7 5/8 | 9 7/8 | 8 3/8 | 9 5/8 | 9 3/8 | 5 1/8 |
| 4 | 9 1/8 | 6 3/4 | 8 1/8 | 7 | 8 | 7 1/2 | 4 1/8 |
| 8 | 15 1/8 | 10 7/8 | 13 3/4 | 12 | 14 | 12 1/2 | 8 |
| 6 | 12 3/8 | 8 5/8 | 11 | 9 3/4 | 11 1/4 | 10 3/8 | 6 1/8 |
| 12 | 21 1/2 | 16 | 20 3/8 | 16 1/2 | 19 1/2 | 17 3/4 | 12 |
| 10 | 18 5/8 | 13 1/4 | 17 | 14 1/8 | 17 | 15 5/8 | 10 1/8 |
| 16 | – | 15 1/4 | 25 1/8 | 21 1/8 | 22 3/8 | 22 | 15 1/4 |
| 14 | – | 17 5/8 | 22 5/8 | 19 | 20 3/8 | 19 1/4 | 13 1/4 |
| 20 | – | 23 3/4 | 29 5/8 | 25 5/8 | 27 3/8 | 26 3/4 | 19 1/4 |
| 18 | – | 21 1/2 | 27 5/8 | 23 3/8 | 25 | 24 | 17 1/4 |
| 24 | – | 28 1/8 | 35 3/8 | 30 3/8 | 32 7/8 | 31 | 23 1/4 |
Flanged bleed Ring are manufactured according to ASME B16.5 and ASME B16.48 standards
Bleed Ring Standards and Regulations
- ASME B16.20 : Metallic Gaskets for Spiral-Wound , Ring-Joint
- ASME B16.5 : Flanged Fittings and Pipe Flanges
- ASME B16.48 : Line Blanks
- ASME B16.47 : Steel Large Diameter Flanges
Application of Bleed Rings for Flanges
- Chemical Processing
- Oil Refining
- Petrochemical Transportation
- drain piping
Bleed flange are designed to withstand any pressure – temperature
- Preventing Contamination
- Pressure Relief
- Leakage Detection
- Inspection
- Flange Maintenance
- Improved Efficiency
- Enhanced Safety
- Sampling
- Accurate Testing
- Flexibility
- Customization
| Sealing face | Ra 6.3µm – 3.2µm |
|---|
View the anticipated period of delivery for different countries.
| Destination Port | Delivery Timeline |
|---|---|
| Dammam – Saudi Arabia | 10-15 days |
| Fujairah – UAE | 7-10 days |
| Durban – South Africa | 25-30 days |
| Jebel Ali – UAE | 7-10 days |
| Singapore | 7-10 days |
| Ras Laffan – Qatar | 10-15 days |
| Rotterdam – Netherlands | 25-30 days |
| Port Harcourt – Nigeria | 25-30 days |
| Suez – Egypt | 15-20 days |
| Batam – Indonesia | 10-15 days |
